Blu-Sub Mechatronics
Universal M8/M10 Installation Wrench
Installation tool
- Supported Sizes
- M8 and M10 Blu-Sub bulkhead components
- Material
- 304 stainless steel
Cable penetrators, underwater connectors, subsea cable and ROV tether. Match the bulkhead thread to your end cap and the seal to your cable's diameter, and check each part's own depth rating.
Blu-Sub Mechatronics
Installation tool
Blue Robotics
Cables, Penetrators, and Connectors
Cable Jacket Stripper from Blue Robotics, part number BR-100429. Earlier part number…
Blue Robotics
Cables, Penetrators, and Connectors
Cable Repair Kit from Blue Robotics, part number BR-100883. Earlier part number TOOL-KIT-CABLE-REPAIR-R1-RP.…
Blue Robotics
Cables, Penetrators, and Connectors
O-Ring Set for M10 Cable Penetrators from Blue Robotics, part number BR-100988-010. Earlier part number…
Blue Robotics
Cable Tools and Supplies
Potting Kit (x 10) from Blue Robotics, part number BR-100693. Earlier part number TOOL-POTTING-KIT-R1-RP.…
Blue Robotics
Penetrators
Spare Bulkhead O-Ring Set - M06 from Blue Robotics, part number BR-100988-006. Earlier part number…
Blue Robotics
Penetrators
Spare Bulkhead O-Ring Set - M10 from Blue Robotics, part number BR-100988-010. Earlier part number…
Blue Robotics
Penetrators
Spare Bulkhead O-Ring Set - M14 from Blue Robotics, part number BR-100988-014. Earlier part number…
Blue Robotics
Penetrators
Spare Bulkhead O-Ring Set - M14 Oversized from Blue Robotics, part number BR-100988-114. Imported to order and…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Assembly Block from Blue Robotics, part number BR-100686. Earlier part number…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Bulkhead Wrench - M06 from Blue Robotics, part number BR-100977-006. Earlier part number…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Bulkhead Wrench - M10 from Blue Robotics, part number BR-100977-010. Earlier part number…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Bulkhead Wrench - M14 from Blue Robotics, part number BR-100977-014. Earlier part number…
Blue Robotics
Cable Tools and Supplies
WetLink Cable Splice Kit from Blue Robotics, part number BR-101170. Imported to order and delivered anywhere…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Plug Wrench - 11 mm Hex (for 4.5 mm penetrators) from Blue Robotics, part number…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Plug Wrench - 14 mm Hex (for 5.5 mm, 6.5 mm, 7.5 mm, 8.5 mm penetrator) from Blue Robotics,…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Plug Wrench - 18 mm Hex (for 9.5 mm penetrators) from Blue Robotics, part number…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 4.5 mm - green seal (10-pack) from Blue Robotics, part number BR-101082-045.…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 5.5 mm - orange seal (10-pack) from Blue Robotics, part number BR-101082-055.…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 6.5 mm - blue seal (10-pack) from Blue Robotics, part number BR-101082-065.…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 7.5 mm - yellow seal (10-pack) from Blue Robotics, part number BR-101082-075.…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 8.5 mm - pink seal (10-pack) from Blue Robotics, part number BR-101082-085.…
Blue Robotics
Cables, Penetrators, and Connectors
WetLink Penetrator Spare Seals - 9.5 mm - red seal (10-pack) from Blue Robotics, part number BR-101082-095.…
Showing 23 of 23 products.
A penetrator is cheaper, smaller and seals the cable permanently. A connector lets you unplug a thruster or sensor to service it. Our guide compares the two by cost, depth and maintenance.
The thread (M6, M8, M10 or M14 here) must match the hole in your end cap. The seal must match the cable's outer diameter: a seal made for a thicker cable will leak.
A connector rated for depth is not necessarily rated to be plugged in under water. Unless the manufacturer says it can be mated wet, connect it dry.
Not by default. Treat every connector here as dry-mate unless its product page quotes the manufacturer rating it for mating under water.
It covers the penetrator installed as the manufacturer describes, with the specified seal on the specified cable diameter. The end cap it threads into and the cable itself have their own limits.