Blu-Sub Mechatronics
Subsea M10 Water Temperature Sensor (BS-SSC-TEMPS-BLK-10A1)
Water temperature sensor
- Output Signal
- I2C, 3.3 V logic (address 0x77)
- Accuracy
- +/-0.1 C (-5 to 50 C); +/-0.5 C (-40 to 125 C)
- Depth Rating
- 1,000 m (3,281 ft)
Depth and pressure sensors, water temperature sensors and leak detectors for ROVs, AUVs and instruments. Compare the measured range, the interface your controller reads and the supply and logic voltages.
Blu-Sub Mechatronics
Water temperature sensor
Blue Robotics
Sensors and Cameras
Celsius Fast-Response, ±0.1°C Temperature Sensor (I2C) from Blue Robotics, part number BR-100317. Earlier part…
Showing 2 of 2 products.
A sensor ranged for 300 m resolves shallow depth less finely than one ranged for 10 m. Choose the smallest range that covers your deepest dive plus a margin, not the largest available.
Several I2C sensors run from one supply but talk at another logic level. Check both against your autopilot or microcontroller, and use a level converter where they differ.
A depth sensor may report temperature from its own element for compensation, but that is not a water temperature sensor's accuracy or response time. Choose each for its own job.
Subtract the atmospheric pressure at the surface and divide by the water's density times gravity: about 1 bar per 10 m in fresh water, a little less depth per bar in sea water. Our pressure and depth guide gives the working.