Blu-Sub Mechatronics
Subsea Acrylic End-Cap
End cap
- Material
- Transparent polished acrylic
- Depth Rating
- 300 m (85mm) / 200 m (115mm) / 50 m (165mm)
- Available Diameters
- 85 mm, 115 mm, 165 mm
Choose a watertight enclosure for underwater electronics by internal space, material, operating depth and cable-entry needs. Tubes, end caps, flanges and seals are sold separately, so check the rating of the complete assembly, not of one part.
Blu-Sub Mechatronics
End cap
Blu-Sub Mechatronics
End cap
Blu-Sub Mechatronics
Flange
Blu-Sub Mechatronics
End cap
Blu-Sub Mechatronics
Flange and end cap
Blu-Sub Mechatronics
Flange and end cap
Blue Robotics
Enclosures, Buoyancy, and Ballast
Coupler Flange - 100 mm (4") from Blue Robotics. Imported to order and delivered anywhere in India.
Blue Robotics
Enclosures, Buoyancy, and Ballast
Coupler Flange - 50 mm (2") from Blue Robotics. Imported to order and delivered anywhere in India.
Blue Robotics
Enclosures, Buoyancy, and Ballast
Coupler Flange - 75 mm (3") from Blue Robotics. Imported to order and delivered anywhere in India.
Blue Robotics
Cylindrical Non-Locking Series (6-8")
O-Ring Flange (6" Series) (non-locking) from Blue Robotics, part number BR-100755. Earlier part number…
Blue Robotics
Cylindrical Non-Locking Series (6-8")
O-Ring Flange (8" Series) (non-locking) from Blue Robotics, part number BR-100908. Earlier part number…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-ring Flanges - 100 mm (4") from Blue Robotics, part number BR-100665. Earlier part number…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-ring Flanges - 130 mm (5") from Blue Robotics, part number BR-102200. Imported to order and delivered…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-ring Flanges - 150 mm (6") from Blue Robotics, part number BR-102201. Imported to order and delivered…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-ring Flanges - 200 mm (8") from Blue Robotics, part number BR-102202. Imported to order and delivered…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-Ring Flanges - 50 mm (2") from Blue Robotics, part number BR-100276-998. Earlier part number BR-100628-998.…
Blue Robotics
Cylindrical Locking Series (2–8”)
O-Ring Flanges - 75 mm (3") from Blue Robotics, part number BR-100647. Earlier part number…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") Dome - Optically Clear Polycarbonate -…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") Dome - Optically Clear Polycarbonate -…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") End Cap - Acrylic - Blank - 300m from Blue…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") End Cap - Aluminum - Blank - 1000 m from…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") End Cap - Aluminum - 5 x M10 Hole - 1000 m…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") End Cap - Aluminum - 10 x M10 Hole - 1000…
Blue Robotics
Cylindrical Locking Series (2–8”)
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4") End Cap - Aluminum - 18 x M10 Hole - 1000…
Showing 24 of 58 products.
Lay out the boards, battery and connectors first, then pick the inner diameter and length with room for wiring and a tray. A longer tube of the same diameter holds more but weighs more and needs more buoyancy.
Clear acrylic lets you see a leak and suits cameras and shallow work; aluminium goes deeper and sheds heat. Our comparison sets out the trade-off.
A housing is only as deep as its weakest part: the tube, each end cap or dome, the flanges and every penetrator through them. A rating printed for one part does not carry over to the assembly.
Count every cable that must pass through an end cap, add a spare, and choose the cap by its hole count and thread.
No. A vacuum test shows the seals are seated and holding. It says nothing about how the tube, caps and dome behave under external water pressure, which the manufacturer's rating and, for critical work, a pressure test cover.
Only where the manufacturer states they fit. Tube diameters, flange designs and O-ring sizes differ between series, so treat parts from different series as incompatible unless documented.